iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual Issue 2.5
15
4 WEB Service
4.1 General
The iPECS system incorporates a Web Server, which the system’s Web Service employs. By using a Web
browser, the system’s Web Server can be accessed, and the database managed in a user-friendly
environment.
In addition to modifying the system database, Web Admin provides Maintenance such as system file upload,
remote upgrade, database download, and maintenance functions.
We provide an Online web user guide to a user. You can get the information about the frequent use of features
by clicking [User’s Guide] on the login page.
The default database includes the assignment of a private IP address to the system. This address (10.10.10.2)
may be used to access the system from the LAN. However, a routable IP address must be assigned for
access from a remote location.
To access the iPECS Web Server requires:
Operating iPECS series system
IP address assigned in the system and is known
TCP port assigned for the KSU LAN port and is known
iPECS system connected to an accessible LAN
iPECS system password (Keyset Admin, Remote access, and CID), if any, is known
4.1.1 PC/Browser
MS Explore 10.0, Chrome 24.0, Firefox 18.0 or higher version is recommended (HTML5 support
required)
Windows PC, at least 32MB RAM (64MB or more RAM is recommended)
NIC (Network Interface Card)
4.1.2 Environment for LAN connection
IEEE 802.3, 10/100 Base T
Static/DHCP addressing
The firewall, requires Network Administrator to allow access.
Remote access requires a routable IP address for the iPECS System Web Server. This must be
assigned to the system before access.
To Next Page
Loading...
