iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual Issue 2.5
149
4.4.5.3 System Password - PGM 162
Selecting System Password will display the System Password data entry page. Use the checkboxes to
indicate which attributes to modify; data for checked attributes is stored for the Keyset Admin, Remote Access
Password, or CID password when saved. Click the [Save] button after changing Value.
It is important to use a strong password to lower the overall risks of a security breach. The best way to choose
a good password is designed to make passwords less easily discovered by intelligent guessing.
Figure 4.4.5.3-1 System Password
Passwords can protect access to the system database and maintenance functions up to twelve (12) digits.
Three passwords can be defined, Keyset Admin, Remote Access, and CID.
Check the save box and enter the password and click the save button.
The following success message is displayed if the password is correct and saved successfully.
Figure 4.4.5.3-2 System Password
To Next Page
Loading...
