iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual Issue 2.5
211
4.4.5.44 PPTP Attributes
Selecting PPTP Attributes will display the PPTP Attributes Table data entry page. Click the [Save] button after
changing Value.
Figure 4.4.5.44-1 PPTP Attributes
When required, the system supports Point to Point Tunneling Protocol (PPTP). PPTP must be enabled, and
values for the PPTP server IP address, Id, and password must be entered, and a server name may be
entered.
To Next Page
Loading...
