iPECS UCP600 - Green Mode Activation

iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual Issue 2.5
378
4.4.18.1 Green mode activation
Selecting Green Mode Activation returns the page shown. Click the [Save] button after changing Value.
Figure 4.4.18.1-1 Green Mode Activation
The system can disable the power of a Digital Phone or Single Line Telephone (SLT) installed in the
HYIB/SLIB/DSIB to save power during night or holiday mode. The power ON/OFF can be controlled by Web
admin manually or automatically by assigning power ON/OFF time.
Table 4.4.18.1-1 Green Mode Activation Attributes
ATTRIBUTE
DESCRIPTION
DEFAULT
Power Save Usage
Enables or Disables Power Save usage.
Disable
Slot No.
The Slot Number of the board are supporting power control.
Board Type
Board Type.
Station Range
Station Number Range of board supporting power control.
Power Save Mode
Enables or Disables Power Save Usage Mode of each board.
Disable
Current Status
It displays the current status of board power ON/OFF.
ON
Power ON button
Power ON manually all of the stations in Power Save used board.
Power OFF button
Power OFF manually all of the stations in Power Save used board.