iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual Issue 2.5
197
4.4.5.32 NTP Attributes - PGM 195
Selecting NTP Attributes will display the System NTP Attributes entry page.
Figure 4.4.5.32-1 NTP Attributes
The system can employ the Network Time Protocol (NTP) to synchronize the system time with an NTP time
server. The system requests the time from the NTP server at 10-minute intervals and then determines the time
differential. If the system time is 2 seconds off the NTP time, the system time is adjusted to synchronize with
the NTP server time.
To Next Page
Loading...
