iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual Issue 2.5
297
4.4.9.8 COS Table
Selecting COS Table will display the COS Table data entry page. Data can be filtered to display specific
modes, and the values to change can be limited to a specific mode and type, Station or System Authorization
codes.
Figure 4.4.9.8-1 COS Table
Assignments for COS are made for the Day, Night, and Timed Ring for each station and system Authorization
code. The standard Station COS 1 to 11 is assigned to each Authorization code. Note the COS may also be
defined in the Station and System Authorization Code Tables.
To Next Page
Loading...
