iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual Issue 2.5
84
4.4.2.13 Station IP Attributes - PGM 122
Selecting Station IP Attributes will display the Station IP Attributes data input page.
Enter a valid Station range and click [Load] to enter the Station IP Attributes data. Use the checkmark to
indicate which attributes to modify; checked attributes are stored by clicking the [Save] button.
Figure 4.4.2.13-1 Station IP Attributes
Stations are allowed access to the system's VoIP resources based on the Station IP Attributes.
To Next Page
Loading...
