iPECS UCP600 - Network Feature Code Table - PGM 325

iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual Issue 2.5
329
4.4.10.7 Network Feature Code Table - PGM 325
Selecting Network Feature Code Table returns the data entry page. Click the [Save] button after changing
Value.
Figure 4.4.10.7-1 Network Feature Code Table
Table 4.4.10.7-1 NETWORK FEATURE CODE TABLE
ATTRIBUTE
DESCRIPTION
RANGE
DEFAULT
Net Feature
Code
Digit sequence or code used to activate special Network Features.
16 digits
None
Net Feature
type
Each Network Feature Code is assigned to activate a feature in
the destination system.
N/A, Internal Page, External Page, All Call Page, Net Door
Open, Conference Room, Call Park,
Refer to
description
N/A
eMG80/100 value range
Internal page: 1-35, External page (1), All Call page (1-3: 1(INT), 2(EXT), 3(ALL)), Net door Open (1-2),
Conference Room (1-9), Call Park (1-19)
eMG80/100 value range
Internal page: 1-35, External page (1), All Call page (1-3: 1(INT), 2(EXT), 3(ALL)), Net door Open (1-4),
Conference Room (1-9), Call Park (1-19)
eMG800value range
Internal page: 1-100, External page (1), All Call page (1-3: 1(INT), 2(EXT), 3(ALL)), Net door Open (1-2),
Conference Room (1-9), Call Park (1-200)