EasyManua.ls Logo

iPECS UCP600 - Voice Mail Dialing Table - PGM 234

iPECS UCP600
721 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual Issue 2.5
247
4.3.9.10 Voice Mail Dialing Table PGM 234
When an external Voice Mail system is used that employs in-band signaling, a digit sequence must be defined
for the system to signal various call characteristics to the Voice Mail system. The voice mail uses the
sequences to determine appropriate announcements or further call routing. The Table permits the definition of
digits as either a prefix or suffix to other digits(station number for mailbox identification). Sequences are
defined for such call characteristics as Put Mail, Get Mail, No Answer call, etc.
PROCEDURE:
VOICE MAIL DIALING TBL
DIAL DIGIT (1-9)
Press the [PGM] button and dial 234.
Use the dial-pad to enter a table entry (1~9). Refer to Table 3.3.9.10-1.
Use the dial-pad to select Prefix or Suffix and the digit sequence, use the
[MSG/CALLBK] button to enter a Pause, refer to Table 3.3.9.10-1.
Press the [Save] button to store the data entry.
Table 3.3.9.10-1 VOICE MAIL DIAL (PGM 234)
BTN
ATTRIBUTE/DISPLAY
DESCRIPTION
RANGE
DEFAULT
1
VOICE MAIL 1
PREFIX OR SUFFIX (1-2)
Code sent when the voice mail is to receive a
call to record a message.
Put Mail
1: Prefix
2: Suffix
Any digits
P#
2
VOICE MAIL 2
PREFIX OR SUFFIX (1-2)
Code sent when the voice mail is to playback
recorded messages.
Get Mail
1: Prefix
2: Suffix
Any digits
P##
3
VOICE MAIL 3
PREFIX OR SUFFIX (1-2)
Code sent when the voice mail is to receive a
call while the user is busy.
Busy Mail
1: Prefix
2: Suffix
Any digits
P#*3P
4
VOICE MAIL 4
PREFIX OR SUFFIX (1-2)
Code sent when the voice mail is to receive a
call while the user is in DND.
DND Mail
1: Prefix
2: Suffix
Any digits
P#*4P
5
VOICE MAIL 5
PREFIX OR SUFFIX (1-2)
Code sent when the voice mail is to receive a
call when the user did not answer.
No Answer Mail
1: Prefix
2: Suffix
Any digits
P#*5P
6
VOICE MAIL 6
PREFIX OR SUFFIX (1-2)
Code sent when the voice mail is to receive a
call when a dialing error exists.
Error Mail
1: Prefix
2: Suffix
Any digits
P#*6P
7
VOICE MAIL 7
PREFIX OR SUFFIX (1-2)
It is reserved.
1: Prefix
2: Suffix
Any digits
8
VOICE MAIL 8
PREFIX OR SUFFIX (1-2)
It is reserved.
1: Prefix
2: Suffix
Any digits
9
VOICE MAIL 9
DISCONNECT[DIALDGT_1]
Code sent when the voice mail is to
disconnect a call.
Disconnect Mail
1: Prefix
2: Suffix
Any digits
*****

Table of Contents

Related product manuals