iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual Issue 2.5
27
4.3.3 iPECS Web Page Navigation
The Navigation frame appears on the left after login; refer to Figure 4.3-1. Selecting a Program group from
either the Navigation pane or the Favorites list will display the selected Web entry page. Each of the system‘s
data entry Web pages includes a frame for data display and modification. To modify data, click on the data
field. A drop-down menu will appear for entry selection, or a cursor will appear in the field, and the user may
type in the required data. Once all new data for a Web page has been entered, the [Save] button must be
clicked to send the new page to the system and save the modified data. In some cases, where mentioned, it
may be necessary to reset the system. The system can be reset manually as described in the iPECS
Hardware Description and Installation Manual by selecting the Reset System button on the Initialization
Web page or using the reset button.
4.3.4 General Web Page Features
4.3.4.1 Web Page Range Entries
On many Web pages for Station, CO Line, and Tables Data, a range of the station, lines, or table indices must
be entered to display the appropriate data entry page. In this case, a range of devices or indices can be
selected by entering the lowest and highest device number separated by a dash. In addition, a comma can be
used to enter non-sequential numbers. Note no space characters should be entered before or after the dash
or comma. Note the data entry page displays the data for the lowest device or table index entered.
4.3.4.2 Table Check Boxes
Data entry pages that require a range entry only display the data for the lowest device number or Table index
entered in the range. A check box is located in front of each attribute to ensure that only the appropriate data
is changed for all entries in the range. When the page is saved, only data for attributes with the box checked
are saved for the range, while data for unchecked attributes are not modified.
4.3.4.3 Sorting Displayed Data
Charts in the data pages typically allow the data to be sorted based on a given column in either ascending or
descending order. In the column header, the sorting symbol displays to indicate the sorting function is
available for the column.
4.3.5 Install wizard
After the system is initialized, the first time Web Admin is accessed, the Install Wizard is displayed. The
Wizard presents 10 pages in sequence with parameters that should be verified or commonly need
modification prior to operation of the system, including:
System Upgrade
Nation Code
System Time&Date
Station Number
Flexible Numbering Plan
CO Ring Assignment
Maintenance ID &Password
IP Information
Config Encryption
License Upload
To Next Page
Loading...
