EasyManua.ls Logo

iPECS UCP600 - Page 148

iPECS UCP600
721 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual Issue 2.5
134
Table 4.4.5.1-1 SYSTEM ATTRIBUTES
ATTRIBUTE
DESCRIPTION
RANGE
DEFAULT
Attendant Call
Queued Ring
Back Tone
When the Attendant is busy receiving a call, the system will
provide either Ring-back tone or Background music (MOH). If
MOH is selected, the Music Source must be defined in ‘Music
source PGM171’.
MOH/
Ring-Back
Tone
MOH
Camp-On
MOH/Ring-Back
Tone
When Camp-On is used, the calling station will receive either a
ring-back tone or MOH. If MOH is selected, a source must be
defined in Music source PGM171’.
MOH/
Ring-Back
Tone
MOH
CO Dial Tone
Detect
The system can use dial-tone detection or a timed pause for
speed dial numbers that contain a Pause.
OFF
ON
OFF
CO Line Choice
The system selects CO Lines from groups using either the LAST
used, FIRST, or ROUND robin method.
LAST
FIRST
ROUND
LAST
DISA Retry
Count
A DISA user is allowed to retry erroneous authentication code
entries. This entry sets the number of retries before the system
disconnects.
1~9
3
External Night
Ring
CO/IP calls, which are assigned UNA, can activate the Loud Bell
Contact. While in the Night mode, an incoming call will activate
the contact.
OFF
ON
OFF
Hold Preference
A single depression of the [Hold] button during CO call places
the call on the preferred hold, System, or Exclusive.
System/
Exclusive
System
Print LCR
Converted digits
SMDR will output the number dialed by either the system’s LCR
or the user.
LCR/
USER
User
Attendant Call
Queuing
The system can be configured to queue incoming calls to a busy
Attendant.
OFF
ON
ON
USE PGM_0 IN
ALL ATD
This field allows Main Attendants to activate Day/Night mode
and other system Attendant menus except PGM 06 Record
system announcement. (Not available in USA version.)
OFF
ON
OFF
Off-net Prompt
Usage
The Off-Net routing prompt can be played when a call is routed
to a destination external to the iPECS. (Not available in US
version)
OFF
ON
OFF
CO to CO
Unsupervised
Conference
Timer Extend
When an Unsupervised Conference is established with DISA,
Off-Net Fwd, etc., The Unsupervised Conference timer
determines the allowed duration of the call. If enabled here, the
user may extend the allowed duration.
OFF
ON
OFF
ACD Manager
Print
When the optional ACD Event messages are required, the
system must be enabled here to send the events.
OFF
ON
OFF
Repeat DTMF
tone
If enabled, the system will repeat DTMF tones to the caller’s
station when the call is routed to an off-net location.
OFF
ON
ON
Off-Hook Ring
Type
An off-hook ring can be a single-tone burst or muted normal ring.
MUTE/
BURST
MUTE
Page Warning
Tone
A warning tone can be sent before a page announcement.
OFF
ON
ON

Table of Contents

Related product manuals