iPECS UCP600 - Page 161

iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual Issue 2.5
147
Table 4.4.5.1-1 SYSTEM ATTRIBUTES
ATTRIBUTE
DESCRIPTION
RANGE
DEFAULT
Received Packet
Count Threshold
This value specifies the threshold value to detect the busy
Ethernet traffic (receiving side). The value is packets count per
second.
40000
Received Octet
Count Threshold
This value specifies the threshold value to detect the busy
Ethernet traffic (receiving side). The value is bytes count per
second. When both Packet and Octet count values are
specified, packet count is used for detecting.
0
IP DECT
Message Server
Port
This port is used to send/receive a message with IP-DECT.
The setting must be changed in IP-DECT Base.
1024-
65535,
0(Unused)
XSI Service Port
This port is used to search directory through Broadsoft
XSI(Extended service interface) protocol
The setting must be changed in IP-DECT Base.
1024-
65535,
0(Unused)