iPECS UCP600 - Page 131

iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual Issue 2.5
117
Table 4.4.4.4-1 ISDN ATTRIBUTES
ATTRIBUTE
DESCRIPTION
RANGE
DEFAULT
Screening
indicator
The ISDN Screening Indicator can configure.
 User-Provided, No Service
 User-Provided, Pass
 User-Provided, Fail
 Network Provided.
Refer to
description
User-
Provided, No
Service
ISDN PLUS
Code
When the incoming CLI starts with “+,” this value will be
inserted in the place of the “+” sign.
0000-9999
-
CP/Alert inband
Send progress indication with in-band information in Call
proceeding and Alerting messages.
OFF
ON
OFF
Disconnect
inband
Send progress indication with in-band information in the
Disconnect message.
OFF
ON
OFF
Disconnect with
Inband Info
When the system receives a DISCONNECT message with
Inband information from PSTN, the following option can be
applied:
 Ignore Inband information: Line is disconnected
 Bypass Inband information: Progress Information is
transferred
 Wait Release: The system wait to send a Release
message till the other party is disconnected
Refer to
description
Wait Release
ISDN Clock
Sync
ISDN clock synchronization is working when “Network Time &
Date”(PGM195) is set to “ISDN CLOCK” and “ISDN Clock
Sync” (PGM143) is ON. It could be controlled by CO line base.
OFF
ON
ON