iPECS UCP600 - Page 139

iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual Issue 2.5
125
Table 4.4.4.10-1 NA ISDN LINE ATTRIBUTES
ATTRIBUTE
DESCRIPTION
RANGE
DEFAULT
EKTS Mode
The EKTS (Electronic Key Telephone Service) terminal permits
users to operate those features specific to EKTS and voice
features that may function distinctly in the EKTS environment.
EKTS allows a DN to be shared by more than one terminal, on the
same or on different interfaces.
NONE/
EKTS
NONE
Type for 1/2/3
ISDN CALLED NO uses the international format, National format,
Network format, Subscriber format, or Abbreviated format when
the user dials 1~3digits.
 Unknown
 International
 National
 Network
 Subscriber
 Abbreviated
Refer to
description
Unknown
Type for 4/5/6
ISDN CALLED NO is constructed with the international format,
National format, Network format, Subscriber format, or
Abbreviated format when the user dials 4~6 digits.
 Unknown
 International
 National
 Network
 Subscriber
 Abbreviated
Refer to
description
Unknown
Type for 7/8/9
ISDN CALLED NO is constructed with the international format,
National format, Network format, Subscriber format, or
Abbreviated format when the user dials 7~9 digits.
 Unknown
 International
 National
 Network
 Subscriber
 Abbreviated
Refer to
description
Unknown
Type for 10/11
ISDN CALLED NO is constructed with the international format,
National format, Network format, Subscriber format, or
Abbreviated format when the user dials more than 10 digits.
 Unknown
 International
 National
 Network
 Subscriber
 Abbreviated
Refer to
description
Unknown