iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual Issue 2.5
2
Appendix A
The Station and Attendant Station User Program codes are listed with the associated function. These fixed
codes are available at the iPECS IP or LDP phones to configure basic functions such as ring tones, activate
features, and assign features and functions to Flex buttons.
Appendix B
This section is a complete listing of the nine basic Flexible Numbering Plans. One is selected as the system’s
Flexible Numbering Plan. Each of the basic Numbering Plans includes all feature and resource access codes,
and any individual code can be changed.
Appendix C
This Appendix includes a detailed listing of all the configurable parameters by Program group and includes the
default values for each parameter. It is only for eMG Station Administration.
Appendix D Station Administration for eMG
This section provides details on configuring the eMG system employing station-allowed administrative access.
Step-by-step procedures are given along with brief but concise descriptions of the various configuration
parameters and available settings. We recommend that you use Section 4 Web administration.
To Next Page
Loading...
