iPECS UCP600 - Page 200

iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual Issue 2.5
186
Table 4.4.5.25-1 SMDR ATTRIBUTES
ATTRIBUTE
DESCRIPTION
RANGE
DEFAULT
VSF Voicemail
indication
Calls to the Voice Mail may be shown as I (Incoming call) or
V(New indication) for Voice Mail in the SMDR record.
I (Incoming call), V (New indication)
Refer to
description
I
Display Nxxxx for
Net number
An “N” can be included in the SMDR to identify the call as a
Network call.
OFF/
ON
OFF
Outgoing call type
Select SMDR type for an outgoing call.
 All call: SMDR can be provided for all outgoing calls.
 Answered call: SMDR can be provided in case the called
party is answered.
Refer to
description
All Call
Print Dialed
number
According to this option, you can print the dialed number.
Dialed digits to PSTN, Dialed digits by user
Refer to
description
Dialed
digits to
PSTN
SMDR REST API
Service
When enabled, the system stores SMDR data to send to the
REST API application.
OFF
ON
OFF
SMDR ICM Ring
Info
When enabled, intercom call data has additional information
about ringing duration. With this option disabled, cannot
differentiate calls if they are answered or unanswered because
the TIME field is used for both talking and ringing durations. With
this option enabled, TIME is only for talking duration, and RING
duration is presented separately as it is presented for CO call
data.
OFF
ON
OFF
SMDR ICM CPN
Info
When enabled, intercom call data has additional information
about original dialed digits. With this option disabled, always
only the last talking or ringing station is specified as called party.
With this option enabled, the original dialed number is presented
separately in the CPN field.
OFF
ON
OFF