iPECS UCP600 - Page 377

iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual Issue 2.5
363
Table 4.4.15.1-1 Common attributes
ATTRIBUTE
DESCRIPTION
RANGE
DEFAULT
Security (option
for UCS XML
Port)
It is security option for UCS XML Port. (8899)
If it is “TLS1.2,” then the system accepts only TLS 1.2.
Other TLS1.1( or below) and SSL will be rejected.
The “Default” option is used for application compatibility as
below.
UCS version that can support TLS1.2:
 UCS Win Client: 6.1.5
 UCS Mac Client: 6.1.3
 UCS Android Client: 6.1.6
 UCS iOS Client: 6.1.3
DEFAULT
TLS 1.2
DEFAULT
Clients Check
Interval
Periodically, the iPECS system will verify the status of logged-in
UCS clients.
30-60
Seconds
30
UCS Server
Type
The UCS service server can be the iPECS system (Standard) or
the external UCS Server (Premium). The UCS Server provides
additional video and collaboration features as Premium service.
When the UCS Server is employed, the Standard Client Login
information (PGM 446) is transferred from the iPECS system to
the UCS Server after the client is registered.
If "Preserve UCS DB when server type is changed" is checked,
UCS DB will not be initialized when UCS server mode is
changed.
Standard
Premium
Standard
LDAP Server Settings
Server Display
Name
When the UCS Client requires access to an LDAP server, the
system will provide the LDAP server information to the client.
The server name is defined in this field.
15
characters
Server IP
When an LDAP server is employed, the IP address of the server
must be defined.
0.0.0.0
Server Port
When an LDAP server is employed, the TCP/IP port of the
server must be defined.
00001-
65535
Require Login
The UCS Client ID and Password may be required to log in to
the LDAP server.
OFF
ON
ON
Use SSL
The client can employ SSL (Secure Sockets Layer) when
supported by the server for added security.
OFF
ON
OFF
Search Base
Search base means Search option. You can get the search
option from the LDAP Server manager. For example, if OU
(Organization Unit) is OC and DC (Directory Company) is ucapp
and com, you can give the option "OU=OC, DC=ucapp,
DC=com" in this field. You will get the desired directory.
Max. 100
characters