iPECS UCP600 - Page 381

iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual Issue 2.5
367
Table 4.4.15.3-1 UCS Premium Client Login
ATTRIBUTE
DESCRIPTION
RANGE
DEFAULT
Member 1
Number
You can enter the number for the Mobile UCS Client.
Member 2
Number
You can enter the number for the Tablet UCS Client.
User ID
The UCS Client Id for the UCS Client can be assigned here
and update PGM 103 and 443.
Min. 4
characters
User PWD
For the UCS Client password, up to 32 characters must be
assigned.
Max. 32
characters
Name
The user’s name, up to 32 characters, should be entered.
Max. 32
characters
Office Phone
Set Office phone number.
Max. 32
characters
Cellular Phone
Set Cellular phone number.
Max. 32
characters
Home Phone
Set Home phone number.
Max. 32
characters
Office Name
Set Office name.
Max. 32
characters
Office
Department
Set Office Department.
Max. 32
characters
Email address
Set Email address.
Max. 40
characters
Linked Pair
If the UCS Client is part of a Linked pair, it must be enabled
here. By entering the Station number of iPECS IP Phone as
the UCS Client Station Number, the stations will employ MAC
linking.
OFF
ON
OFF
Unique ID
When the UCS Server is employed, each client must have a
unique Id of at least 40 characters, which identifies the clients
to the UCS Server. Once the Client registers, the iPECS
system will send the information to the UCS Server. Note that
the UCS Server Type in PGM 445 must be configured as
“Premium.”
Min. 40
characters
Mutual presence
permission
The presence status of the Client can be shared with other
clients.
OFF
ON
OFF
License
The status of the license will be displayed, and select the
license for usage among the range.
ADVANCED
BASIC
POWER
PREM-V
PREM-NV
MOBILE
ADVANCED