iPECS UCP600 - Page 387

iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual Issue 2.5
373
Table 4.4.16.1-1 DECT Registration
ATTRIBUTE
DESCRIPTION
RANGE
DEFAULT
Phone Type
Several types of handsets may be selected.
Press the [Send] button after entering the number and type.
GDC-480H/500H, GDC-400/450H, Standard GAP
Refer to
description
GDC-
480H/500H
DECT
Unsubscribe
To terminate a subscription, enter the station number for the
DECT handset. Note the Station must be connected.
Otherwise, use the Station Erase field below.
Station
number
DECT User
Authentication
The user will be required to enter the Station Authorization
Code from PGM 227 to subscribe.
DECT Mobility
When a DECT handset is registered to multiple systems that
are networked, calls can be routed over the network to the
DECT handset location.
Station
number
Enter the registered station number, select Mobility ON or
OFF, click the [write] box, then Save the page.
OFF
ON
OFF
Station Erase
To terminate the registration for a DECT phone that is not
connected, enter the registered station number and click the
[Save] button.
Station
number