iPECS UCP600 - Page 480

iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual Issue 2.5
39
Table C-5 CO LINE DATA
BTN
SUB-MENU
RANGE
DEFAULT
REMARK
18
Preserve Name for DID calls
1: ON, 0: OFF
OFF
19
ISDN Redirecting number
No SVC / ORI/CFW
No SVC
20
Choice Incoming CLI
Transit Point CLI
/ Original CLI
Transit Point
CLI
21
Calling Party Numbering Plan
0-6
1
0: Unknown.
1: ISDN / Telephony.
2: Data / Numbering.
3: Telex.
4: National Standard.
5: Private.
6: Reserved.
22
Called Party Numbering Plan
0-6
0
0: Unknown.
1: ISDN / Telephony.
2: Data / Numbering.
3: Telex.
4: National Standard.
5: Private.
6: Reserved.
23
Screening Indicator
0-3
0
0: User Provided, No Service.
1: User Provided, Pass.
2: User Provided, Fail.
3: Network Provided.
24
Added CO line attributes
24-1
Station CLI Type
Station CLI 1-5
Station CLI 1
24-2
ISDN PLUS Code
Max 4 digits
-
24-3
CP/ALERT INBAND
1: ON, 0: OFF
OFF
24-4
Disconnect INBAND
1: ON, 0: OFF
OFF
24-5
Bursting to Caller
1: ON, 0: OFF
OFF
PGM: 144 - CO Ring Assignment
1
Day
Station/Group
Dial 1: Station + Delay
(0~9 ring cycles)
Dial 2: Hunt group
Dial 3: VSF announcement
(01~70)
Dial 4: AA Ring delay Time
(00~30 sec.)
2
Night
Station/Group
3
Timed Ring
Station/Group
PGM: 145 - DID Service Attributes
1
DID Signal
1: Immediate
2: Wink
3: Delayed Dial
Wink