iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual Issue 2.5
35
eMG800
Flexible VMIU/VOIU channel
You can select one of the following types according to the current configuration using Voice mail and VoIP
channel.
UCP
You can set VOIU on this page.
The MCIU (Audio Conference) channel is flexible according to VoIU ‘Enable or Disable’ and installing the
related module as below:
Speed Numbering’
You can easily memorize the system speed dial code and station dial code by selecting the desired type
depending on the situation among the following types:
eMG80/100
1) Type (0): System speed (2000~4999), Station speed (000~099)
2) Type (1): System speed (200~999), Station speed (000~099)
3) Type (2): System speed (200~999), Station speed (00~19)
4) Type (3): System speed (20~99), Station speed (00~19)
5) Type (4): System speed (1000~3999), Station speed (000~099)
6) Type (5): System speed (100~999), Station speed (000~099)
7) Type (6): System speed (100~999), Station speed (00~09)
8) Type (7): System speed (10~99), Station speed (00~09)
9) Type (8): System speed (1~9), Station speed (0~0)
To Next Page
Loading...
