iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual Issue 2.5
- User password length control
- Access Control on PGM / MENU buttons
- Improve UI of Message
- The automatic alarm call and play a pre-recorded announcement
- Emergency Page option
- Outbound PRI Name Display
- EXEC/SEC - add secretary call option
- SMDR info for the incoming call to a group
- Add an option for video call
- Add base call cost option
- Analog CO Call Charge with NPR metering
- Add an option for built-in VM/VOIP channel (eMG80)
- RTP/SRTP SSRC filtering
- PPP over ISDN (eMG80/800)
- CIQ Alert Announcement in case of being CPU Redundancy
- Print Destination in CLI Print
- Add '+' in Outgoing Call in SIP
- SIP Name Display
- Improved LDAP Attributes
S/W version 3.1.x.
- “Config Encryption”
- Added “Conference room expansion.”
- Add "USB serial usage."
- Change the Range of Web Admin Login Failure count to block
- Change the length of the max characters of "E-Mail Account Password."
- Added "UCS PUSH POLLING Use"
- Add "Key Pad Tone" option
- Removed the “Cascade Apply Type”
- Added “Clear Missed Call Log”
- Change the length of the max characters of "E-Mail Account Password."
- Changed the range of “Ring Group Indication.”
- Added "T1 Timer"
- Change to max 64 characters of the email address field
- Change to max 32 characters of the unique ID field
S/W version 3.5.x.
- Added " Phone Lock/Unlock, "Flexible Page Prefix”
- Added “Auto Transfer By Button To Last Call" and “DTMF tone for Flexible
button” at the Tone/Ring Attributes
- Added “PHONE Lock Status(Force to Set), “PHONE Auto Lock Usage,” “PHONE
Auto Lock Timer,” “PHONE Lock Action for Hot-Desk,” “Allow to Stop - Flexible
Paging”
- Added " Coverage Call Log, "Page Call Log,” “Busy/DND/VM Log”
- Added “REST API Service Port,” “REST API Session Timeout,” “Security (option
for MSVC XML Port),” “CALL TRACKING Enable,” “SLT conference hook switch
time.”
To Next Page
Loading...
