iPECS UCP600 - Page 529

iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual Issue 2.5
88
Table 3.3.2.5-2 FLEXIBLE NUMBERING PLAN PART B (PGM 107)
BTN
DISPLAY
FEATURE
DEFAULT
22
ATTENDANT CALL
ENTER NEW #:0
Dial code to call an Attendant.
0
23
VM MSG WAIT ENABLE
ENTER NEW #:*8
Dial code for external Voice mail to
activate Message Wait indication.
*8
24
VM MSG WAIT CANCEL
ENTER NEW #:*9
Dial code for external Voice Mail to
deactivate Message Wait indications.
*9
Table 3.3.2.5-3 FLEXIBLE NUMBERING PLAN PART C (PGM 108)
BTN
DISPLAY
FEATURE
DEFAULT
1
DOOR OPEN 1
ENTER NEW #:#*1
Dial code to activate Door 1 contact (open
door 1)
#*1
2
DOOR OPEN 2
ENTER NEW #:#*2
Dial code to activate Door 2 contact (open
door 2).
#*2
Table 3.3.2.5-4 FLEXIBLE NUMBERING PLAN PART D (PGM 109)
BTN
DISPLAY
FEATURE
DEFAULT
1
MCID REQUEST
ENTER NEW #:*0
Dial code to activate Malicious Call ID
Request in ISDN Supplementary service.
Not available in USA version.
*0
2
AME FEATURE
ENTER NEW #: 564
Dial code to assign an Answering
Machine Emulation Flex button.
564
3
US-CONF TMR EXTENSION
ENTER NEW #:##
Dial code to extend Unsupervised
conference time.
##
4
PTT GROUP LOGIN/OUT
ENTER NEW #:#0
Push-To-Talk group login and logout dial
code. The station must have a PTT button
for proper operation.
#0
5
ACD AGENT P LOGIN
ENTER NEW #:581
ACD Agent Primary Login code.
581
6
ACD AGENT P LOGOUT
ENTER NEW #:582
ACD Agent Primary Logout code.
582