iPECS UCP600 - Page 666

iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual Issue 2.5
225
4.3.8.3 MSN Table – PGM 202
When an ISDN Line assigned for DID operation receives an incoming call, the call will be routed to a station
based on the Flexible DID Table Index in the MSN Table.
PROCEDURE
MSN TABLE ATT
ENTER BIN NO ( 001 – 500 )
Press the [PGM] button and dial 202, and enter the bin number (Ex.121).
(eMG80/100:001~500/ eMG800:1~1500)
MSN TABLE 121
PRESS FLEX KEY ( 1 – 3 )
Use the dial pad to enter an MSN Table index number.
Press the Flex button for the desired MSN Table entry; refer to Table
3.3.8.3-1.
Use the dial pad to enter the desired Table data.
Press the [Save] button to store the Table data entry.
Table 3.3.8.3-1 MSN ATTRIBUTES (PGM 202)
BTN
ATTRIBUTE/DISPLAY
DESCRIPTION
RANGE
DEFAULT
1
MSN TABLE 121 CO RANGE
… - …
CO Line number is associated
with the MSN.
None
2
MSN TABLE 121
INDEX : NOT ASSIGNED
Index to the Flexible DID Table,
PGM 231.
000~999
None
3
TABLE 121 TEL NUMBER
……………………..
Telephone Number (called
number)
23 Digits
None