iPECS UCP600 - Page 685

iPECS eMG80/100& eMG800 & UCP & vUCP
Administration and Programming Manual Issue 2.5
244
Table 3.3.9.7-1 FLEXIBLE DID CONVERSION (PGM 231)
BTN
ATTRIBUTE/DISPLAY
DESCRIPTION
RANGE
DEFAULT
7
TABLE 001 AUTO RING TBL
(00-16),16:N/A) : 00
A DID Conversion Table Index can be
assigned to employ an Auto ring mode
table, section 3.3.9.9.
00-16
00
8
TABLE 001 MOH : (00-37)
REFER TO CO HOLD(00)
A Music source is assigned so that calls
to the destination receive audio from the
source in place of ring-back tone.
 00: Refer to CO Hold
 01: INT Music
 02: EXT Music
 03: VSF MOH
 04~08: SLT MOH1~5
 09~37: VSF MOH2~30
Refer to
Description
Refer to
CO Hold
9
TABLE 001 RING TONE
(00-16, 0:N/A) : 00
The ring tone of destination is followed
this ring tone value.
2 digits.
00~16
00
Table 3.3.9.7-2 FLEXIBLE DID DESTINATION (PGM 231)
TYPE
DESCRIPTION
01
Route to a Station
02
Route to a Hunt Group
03
Route with System Speed Dial
04
Route as PBX Transfer with System Speed Dial
(Flash then dial speed dial digits)
05
Route to VSF AA Announcement
06
Route to VSF AA Announcement and disconnect
07
Route to a Networking Station
08
Conference Room
09
Internal Page
10
External page
11
All Call Page
12
Voice Mail Box Group
Voice Mail Box Station
13
ICLID Ring Assignment Table
14
Company Directory
15
Record VM Greeting
16
Room Type Conf Group Join
(Value: system conference group number)
(Value Range: eMG80/100(0 or 100~139), eMG800/UCP(0 or 100~259)