Lexmark X95 series - Page 60

2-10 Service Manual
7558-xxx
Go Back
Previous
Next
62 Disk full Try one or more of the following:
• Touch Continue to clear the message and continue processing.
• Delete fonts, macros, and other data stored on the printer hard disk.
• Install a printer hard disk with larger capacity.
63 Unformatted disk Try one or more of the following:
• Touch Continue to clear the message and continue printing.
• Format the printer hard disk.
If the error message remains, the hard disk may be defective and require
replacing.
80.xx Fuser life warning • Order a replacement fuser immediately. When print quality is reduced, install
the new fuser, following the instruction sheet that came with the replacement
part.
• Touch Continue to clear the message and continue printing.
80 Replace fuser 1. Replace the fuser using the instruction sheet that came with the replacement
part.
2. Touch Continue to clear the message and continue printing.
80 Scanner
maintenance required,
use ADF kit
Contact customer support, and report the message. The printer is scheduled for
maintenance.
80 Scheduled
maintenance [x]
Contact customer support, and report the message. The printer is scheduled for
maintenance.
82.xx Replace waste
toner bottle
1. Replace the waste toner bottle.
For instructions on replacing the waste toner bottle, from the printer control
panel touch More Information.
2. Touch Continue to clear the message and continue printing.
82.xx Waste toner bottle
missing
Reinsert the waste toner bottle into the printer.
82.xx Waste toner bottle
nearly full
Order a replacement waste toner bottle immediately.
1. Replace the waste toner bottle.
For instructions on installing the waste toner bottle, from the printer control
panel touch More Information.
2. Touch Continue to clear the message and continue printing.
84 unsupported [color]
photoconductor
Remove the specified photoconductor, and then install a supported one.
84.xx [color]
photoconductor missing
Install the specified color photoconductor, following the instruction sheet that came
with the replacement part.
84.xx [color]
photoconductor nearly
low
1. Order a replacement photoconductor.
2. When print quality is reduced, install the new photoconductor, following the
instruction sheet that came with the replacement part.
3. Touch Continue to clear the message and continue printing.
84.xx [color]
photoconductor low
1. Order a replacement photoconductor immediately.
2. When print quality is reduced, install the new photoconductor, following the
instruction sheet that came with the replacement part.
3. Touch Continue to clear the message and continue printing.
83.xx Transfer module
missing
Insert the transfer module into the printer.
84.xx Replace [color]
photoconductor
1. Replace the photoconductor, following the instruction sheet that came with the
replacement part.
2. From the printer control panel, touch Continue to clear the message and
continue printing.
User status and attendance messages
User primary message Explanation