Lexmark X95 series - Page 67

Diagnostic information 2-17
7558-xxx
Go Back
Previous
Next
126.06
Service fuser error
Fuser driver low voltage error Fuser driver voltage levels has not
reached the specified value.
Go to “126.06 Fuser driver low voltage
error” on page 2-62
126.07
Service fuser error
Fuser driver suge failure A surge in voltage is detected in the fuser.
Go to “126.07 Fuser driver surge
failure” on page 2-62.
126.08
Service fuser error
IGBT high temperature error High temperature is detected at the IGBT.
Go to “126.08 IGBT high temperature
error” on page 2-62.
126.09
Service fuser error
IGBT temperature sensor failure Open circuit is detected at the IGBT.
Go to “126.09 IGBT temperature sensor
failure” on page 2-63.
126.12
Service fuser error
Input low current error The input current supplied to the fuser is
below the lower limit at the specified time.
Go to “126.12 Input low current error”
on page 2-63.
132.01
Service engine error
ATC sensor(K) failure There is an error at the ATC sensor.
Go to “132.01 ATC sensor (K) failure”
on page 2-64.
132.03
Service engine error
ATC sensor(M) failure There is an error at the ATC sensor.
Go to “132.03 ATC sensor (M) failure”
on page 2-67.
132.04
Service engine error
ATC sensor(C) failure There is an error at the ATC sensor.
Go to “132.04 ATC sensor (C) failure”
on page 2-68.
137.01
Service engine error
ATC sensor(Y) failure There is an error at the ATC sensor.
Go to “137.01 Upper printer engine
PCBA communication error” on
page 2-69.
137.01
Service engine error
Upper printer engine PCBA
communication error
There is a communication error between
the upper engine and a sub system.
Go to “137.01 Upper printer engine
PCBA communication error” on
page 2-69.
140.01
Service engine error
Registration drive motor failure. The registration drive motor is not
functioning.
Go to “140.01 Registration drive motor
failure” on page 2-70.
141.01
Service engine error
Drum drive motor (K) failure The PC drive motor is not functioning.
Go to “141.01 Drum drive motor (K)
failure” on page 2-70.
141.02
Service engine error
Drum drive motor (Y/M/C) failure The PC drive motor is not functioning.
Go to “141.02 Drum drive motor (Y/M/C)
failure” on page 2-71.
1xx service error codes
Error code Description Action