1 – 135
Chapter 1 Troubleshooting
6. Judgment of Print Consistency
It is stated here how to judge simply the main print consistency printing with the standard paper (letter
size). Keep the paper packaged in the operating environment for 12 hours, and then use the paper just
after it has been unpacked.
Note
The image quality cannot be evaluated when the machine is faulty.
6.1 Leading edge registration
Measurement of the amount of print shift from the ideal position on the paper
Measure the amount of shift from the ideal point 15 mm away from the front end at center of right and
left of the paper.
Reference: less than +/-2.0 mm
To Next Page
Loading...
