EasyManuals Logo

Oki B6500 Service Manual

Oki B6500
616 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #528 background imageLoading...
Page #528 background image
6 – 18
Chapter 6 Principles of Operation
5.3 Xero
EP CARTRIDGE
The EP CARTRIDGE is also known as CRU (Customer Replaceable Unit), and is
made up of the following five components.
-Drum
This is a cylinder of aluminum and coated with a photoconductive material. Because of this
photoconductive coating layer, electric charges are retained on the surface in the dark, and
electrical conduction occurs when exposed to light.
-BCR (Bias Charge Roll)
This uniformly distributes electric charges over the drum surface, and erases a charge-
reduced pattern remaining from the previous cycle.
-Magnet Roll
This holds toner as a thin layer on the surface of this roll, and acts to transport the toner into
the gap between the drum and Magnet Roll. The toner is supplied to the Magnet Roll by the
Agitator in the Toner Compartment.
-CM Blade (Charging and Metering Blade)
This spreads the toner into a thin layer over the Magnet Roll, and applies negative charges to
the toner tribo-electrically.
-Cleaning Blade
This scrapes toner remaining after the transfer step off the drum surface.
BTR ASSY
The BTR of the BTR ASSY is in contact with the drum of the EP CARTRIDGE, and
is driven by the Drum Gear. When the paper moves between the BTR and Drum,
the BTR applies positive charges to the rear surface of the paper. The negatively
charged toner image is attracted by positive charges on the rear surface of the
paper. Thus, the image is transferred from the surface of the drum to the surface of
the paper.

Table of Contents

Other manuals for Oki B6500

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Oki B6500 and is the answer not in the manual?

Oki B6500 Specifications

General IconGeneral
ColorNo
Duplex printingYes
Maximum resolution1200 x 1200 DPI
Time to first page (black, normal)8 s
Print speed (black, normal quality, A4/US Letter)45 ppm
Flash memory512 MB
Storage mediaHDD
Internal memory128 MB
Maximum internal memory640 MB
Internal storage capacity40 GB
Total input capacity700 sheets
Total output capacity500 sheets
Maximum input capacity1800 sheets
Power requirements230V
Standard media sizes3\
Power consumption (active)880 W
Compatible operating systemsWindows, XP (Home, Professional); 2000 (Workstation, Professional, Server, Advanced Server – SP4 +); NT 4.0 (Workstation, Server – SP6 +); ME; 98/98 SE; Mac OS 9.1+/10.1+; Unix (Sun Solaris 8, 7, 2.5; HP-UX 11.0/ 10.20); Linux (Redhat 6.x).
Envelopes sizesC5, DL
Media weight (tray 1)60 - 216 gsm
Non-ISO print media sizesExecutive (184 x 267mm), index card, Letter (media size), Statement (140 x 216mm), Legal (media size)
ISO A-series sizes (A0...A9)A4, A5, A6
ISO B-series sizes (B0...B9)B5
Maximum ISO A-series paper sizeA4
PCL fonts86
Printer fontsPCL, PostScript
Maximum duty cycle200000 pages per month
Number of PostScript fonts136
Power consumption (standby)110 W
Power consumption (printing)1200 W
Weight and Dimensions IconWeight and Dimensions
Dimensions (WxDxH)422 x 465 x 404 mm

Related product manuals