Oki B6500

1 – 75
Chapter 1 Troubleshooting
FIP2.6 Paper Size Error/Duplex
Step Check Yes No
1
Possible causes:
HVPS/MCU (PL12.1.19)
GUIDE TRAY LEFT (PL7.1.7)
PWBA FEEDER 550 (PL20.1.34)
Checking paper size Is the paper size capable for
duplex printing?
Go to step 2. Replace the paper.
2
Checking the paper size setup
Does the paper size in use match the size set by
GUIDE ASSY END?
Go to step 3.
Change the paper
size setup.
3
Checking NVRAM data
Does NV01 setup match the specification of printer?
Go to step 4.
Modify the memory
data of NV01.
4
Checking the paper tray (1)
Is it Tray 1 that is in use, when Error occurred?
Replace HVPS/
MCU.
(RRP12.10)
Go to step 5.
5
Checking the paper tray (2)
Is it Tray 2 that is in use, when Error occurred?
Replace HVPS/
MCU.
(RRP12.10)
Go to step 6.
6
Checking the paper tray (3)
Is it Tray 3 that is in use, when Error occurred?
Go to FIP4.6, 4.7
PWBA FEEDER
550.
Go to step 7.
7
Checking the paper tray (4)
Is it Tray 4 that is in use, when Error occurred?
Go to FIP4.6, 4.7
PWBA FEEDER
550.
Replace HVPS/
MCU. (RRP12.10)