2 - 1
Chapter 2 Diagnostics
Chapter 2 Diagnostics
1. Diagnostics
1.1 Overview
Diagnostics enable you to run various test on printer components. You can run motors forward and
reverse and at different speeds, the actuation and de-actuation of sensors or switches, energize and
de-energize solenoids, etc.
In addition, you can perform tray alignment routines, reset maintenance counters, set serial number
and asset tag, test the operator panel and run test prints.
The Diagnostic Mode has the following menus:
Digital Output
Digital Input
Analog Output
Analog Input
EEPROM Address
EEPROM Value
Maintenance Info
Operator Panel
Test Print
Flash Summary
Print Summary
To Next Page
Loading...
