2 - 2
Chapter 2 Diagnostics
2. Entering Diagnostics
To enter diagnostics, perform the following:
1. Switch the printer power OFF.
2. Press and hold both the “Menu” and “X” buttons on the Operator Panel
3. Switch the printer power ON.
4. Continue to hold the “Menu” and “X” buttons until “Initializing” is displayed on the LCD.
5. Release the two buttons, after a short period of time, “Output Tests” will be displayed.
6. Proceed to Main Menu.
To exit diagnostics, repeatedly press the “Cancel” button until Ready is displayed.
Control Panel Layout
To Next Page
Loading...
