8 - 9
Chapter 8 Printer Specifications
4.1.8 Continuous Print Speed
The following data are theoretical values for Input Trays 1,2,3 and 4.
Notes:
1. The controller requires 2 pages of print buffer (one-batch mode) to achieve the duplex
speeds.
2. Envelopes: Specified Com#10.
3. Print speed is a theoretical feeding out speed.
4. During consecutive running thick stock Mode 1, engine will go into fuser cool down
mode
*6
after every 50 impressions.
5. During consecutive running thick stock Mode 2, engine will go into fuser cool down
mode
*6
after every 30 impressions.
6. Fuser cool down mode means: Main motor stops scanner motor is spinning and main
fan is working at high speed approximately 1 min.
4.1.9 Printable Area
The print engine shall be capable of producing printed images meeting the Print Quality Spec to within
4mm of the edge of the paper. Within the 4mm border, the print engine shall be capable of legibly printing
6 point Arial font or larger on baseline paper.
For Duplex side, the lead edge guaranteed border will be 6mm.
4.2 Media Feed Specifications
4.2.1 1
st
Media Input Tray (150 Sheet Universal)
The 1
st
Media Input Tray shall support the following media:
1. Media Size
- Width: 76.2mm (3.0 inch) ~ 215.9mm (8.5 inch)
- Length: 127.0mm (5.0 inch) ~ 900mm (35.4 inch)
2. Media Weight
- Qualified paper: 64gsm(17.1lb) ~ 216gsm(80lb)
Paper Size
Simplex/
Thin Paper
Mode (ppm)
Simplex
OHP Mode
(ppm)
*4
Simplex
Thick Stock
Mode1/
Label Mode
(ppm)
*5
Simplex
Thick Stock
Mode2
(ppm)
Simplex Thick
Stock Mode3
(1/2 Speed)
(ppm)
Duplex
(ipm)
*4
Duplex
Thick Stock
Mode1
(ppm)
*5
Duplex
Thick Stock
Mode2
(ipm)
Letter SEF 45.1 22.4 (Target) 33.0 (Target) 13.1 (Target) 22.6 (Target) 27.2 24.7 (Target) 13.1 (Target)
A4 SEF 43.0 22.4 (Target) 33.0 (Target) 13.1 (Target) 21.5 (Target) 26.4 24.4 (Target) 13.1 (Target)
Legal
14”SEF
37.2 (Target) - 33.0 (Target) 13.1 (Target) 18.6 (Target) 24.1 (Target) 23.4 (Target) 13.1 (Target)
Legal
13”SEF
39.5 (Target) - 33.0 (Target) 13.1 (Target) 19.8 (Target) 25.0 (Target) 23.8 (Target) 13.1 (Target)
Executive 45.1 (Target) - 33.0 (Target) 13.1 (Target) 22.6 (Target) 27.5 (Target) 24.9 (Target) 13.1 (Target)
B5 (JIS)
SEF
45.1 (Target) - 33.0 (Target) 13.1 (Target) 22.6 (Target) 27.7 (Target) 25.1 (Target) 13.1 (Target)
Envelopes - - 19.7 (Target) 13.1 (Target) 18.0 (Target) - - -