2 - 6
Chapter 2 Diagnostics
6. Alignment
The image registration alignment allows each tray to be adjusted independently. Alignment routines are
used to set “X” and “Y” values for the paper trays.
With “Alignment” displayed on the LCD, pressing the “X” button will enter the “Alignment” menu and
display the first menu selection (Tray1 Y Adjust). Pressing the “X” button again will enable the “Tray1 Y
Adjust”. Pressing “W” halts the test.
Pressing the “T “and “S“buttons changes the value from 0 - 15.
The illustration that follows shows all the sub-menus in the Alignment menu.
To Next Page
Loading...
