3 - 155
Chapter 3 Removal and Replacement Procedures (RRPs)
When installing, pull the CHUTE EXIT FUSER lever.
8) Install the COVER EXIT 500 (PL 1.1) (RRP7.1).
9) Install the COVER RIGHT (PL 1.1) (RRP1.2).
10) Install the COVER LEFT (PL 1.1) (RRP1.3).
11) Install the COVER REAR (PL 1.1) (RRP1.1).
There are 2 kinds of screws, make sure they are installed correctly.
12) Install the COVER REAR 500 (PL 7.1) (RRP7.9).
To Next Page
Loading...
