Oki B6500

3 - 161
Chapter 3 Removal and Replacement Procedures (RRPs)
3) Replace the BRACKET SHIELD HVPS (PL 9.1) to the frame and secure with 3 screws (silver,
6mm) (Figure 1).
4) Reconnect the harness connectors: (P/J10, P/J11, P/J13, P/J14, P/J15, P/J16, P/J17, P/J18, P/
J20, P/J22, P/J24, P/J26, P/J 27, P/J 28, P/J29, P/J30, and P/J31) on the HVPS/MCU (Figure 1).
5) Replace the BRACKET HANDLE R on the frame.
6) Replace the screw (silver, 6mm) securing the BRACKET HANDLE R (PL 9.1.12) to the frame.
7) Replace the SHIELD PLATE HVPS (PL 9.1) (RRP9.9).
8) Replace the SHIELD ASSEMBLY ESS (PL 9.1) (RRP9.7).
9) Replace the COVER RIGHT (PL 1.1) (RRP1.2).