3 - 170
Chapter 3 Removal and Replacement Procedures (RRPs)
When installing, be sure to fit the positioning holes on the COVER TOP to the
bosses on the COVER HSG DUP.
4) Install the COVER RIGHT (PL 10.1). (RRP10.10)
When installing, be sure to fit the positioning holes on the COVER RIGHT to the
bosses on the COVER HSG DUP.
5) Install the COVER LEFT (PL 10.1). (RRP10.9)
When installing, be sure to fit the positioning holes on the COVER LEFT to the
bosses on the COVER HSG DUP.
To Next Page
Loading...
