3 - 228
Chapter 3 Removal and Replacement Procedures (RRPs)
When installing, do not hold the rubber rollers of the ROLL ASSY FEED.
2) Install the ROLL ASSY NUDGER to the SHFT NUDGER (PL 12.2.9), and secure the ROLL
ASSY NUDGER with the hook.
Be sure to install the hook of the ROLL ASSY NUDGER into the groove of the SHAFT
NUDGER.
When installing, do not hold the rubber rollers of the ROLL ASSY NUDGER.
To Next Page
Loading...
