Rohde & Schwarz RTP044 - Page 1644

Remote control commands
R&S
®
RTP
1644User Manual 1337.9952.02 ─ 12
SEARch:TRIGger:CAN:BITSterror <SearchName>,<BitStuffError>
SEARch:TRIGger:CAN:BITSterror? <SearchName>
Searches for bit stuffing errors.
Parameters:
<BitStuffError> ON | OFF
*RST: ON
Parameters for setting and query:
<SearchName>
SEARch:TRIGger:CAN:CRCerror
<SearchName>,<ChecksumError>
SEARch:TRIGger:CAN:CRCerror? <SearchName>
Searches for errors in the Cyclic Redundancy Check.
Parameters:
<ChecksumError> ON | OFF
*RST: ON
Parameters for setting and query:
<SearchName>
SEARch:TRIGger:CAN:FORMerror <SearchName>,<FormError>
SEARch:TRIGger:CAN:FORMerror? <SearchName>
Searches for form errors. A form error occurs when a fixed-form bit field contains one
or more illegal bits.
Parameters:
<FormError> ON | OFF
*RST: ON
Parameters for setting and query:
<SearchName>
SEARch:TRIGger:CAN:FDATa:SCERror <SearchName>,<StuffCountError>
SEARch:TRIGger:CAN:FDATa:SCERror? <SearchName>
Triggers on stuff count errors. A stuff count error occurs if th received stuff count value
does not match the value calculated from the own stuff bit count.
Only relevant for CAN FD signals in ISO standard.
Parameters:
<StuffCountError> ON | OFF
*RST: ON
Parameters for setting and query:
<SearchName>
Protocols