Getting started
R&S
®
RTP
63User Manual 1337.9952.02 ─ 12
form-related display elements are shown in Figure 3-3. An overview of control ele-
ments - like dialog box, toolbar - is given in Chapter 3.3.2.2, "Control elements on the
touchscreen", on page 66.
Figure 3-3: Display information
1 = Diagram
2 = Grid
3 = Trigger position
4 = Reference point (distance from trigger position to reference point = horizontal position)
5 = Trigger, horizontal and acquisition label
6 = Notifications
7 = Zoom area
8 = Zoom diagram
9 = Trigger level
10 = Signal bar with inactive waveforms (10a), minimized live waveform (10b) and signal icon with vertical
settings (10c)
11 = Histogram area
12 = Histogram
Diagram
A diagram shows one or more waveforms: channel, reference, and math waveforms
together with histograms, masks etc. Zoom details, XY-waveforms, spectra and other
special waveforms are shown in separate diagrams.
Operating the instrument
To Next Page
Loading...
