Rohde & Schwarz RTP044 - Page 859

Protocol analysis
R&S
®
RTP
859User Manual 1337.9952.02 ─ 12
You can define individual search parameters for individual fields in the table below the
"Search criteria" dialog. To specify these parameters, select a field in this table and
define the data and/or index operators and values, or the bit state.
For a description of how to set the search conditions, see Chapter 13.20.3.1, "USBPD
trigger settings", on page 854.
Remote command:
SEARch:TRIGger:USBPd:ERENable on page 2095
SEARch:TRIGger:USBPd:ERRor<m>:ENABle on page 2095
SEARch:TRIGger:USBPd:BIT on page 2097
SEARch:TRIGger:USBPd:FRAMe<m>:FLD<n>:BIT on page 2097
SEARch:TRIGger:USBPd:DMAX on page 2097
SEARch:TRIGger:USBPd:FRAMe<m>:FLD<n>:DMAX on page 2097
SEARch:TRIGger:USBPd:DMIN on page 2098
SEARch:TRIGger:USBPd:FRAMe<m>:FLD<n>:DMIN on page 2098
SEARch:TRIGger:USBPd:DOPerator on page 2098
SEARch:TRIGger:USBPd:FRAMe<m>:FLD<n>:DOPerator on page 2098
SEARch:TRIGger:USBPd:IMAX on page 2099
SEARch:TRIGger:USBPd:FRAMe<m>:FLD<n>:IMAX on page 2099
SEARch:TRIGger:USBPd:IMIN on page 2099
SEARch:TRIGger:USBPd:FRAMe<m>:FLD<n>:IMIN on page 2099
SEARch:TRIGger:USBPd:IOPerator on page 2100
SEARch:TRIGger:USBPd:FRAMe<m>:FLD<n>:IOPerator on page 2100
USBPD (option R&S
RTP-K63)