Rohde & Schwarz RTP044 - Page 962

Waveform generator (Option R&S RTP-B6)
R&S
®
RTP
962User Manual 1337.9952.02 ─ 12
15.1.3.1 General settings
Consists of settings for selecting the modulation type.
Modulation type
Selects the modulation type, which defines how the carrier signal is modified.
"AM"
Amplitude modulation.
See: Chapter 15.1.3.2, "AM modulation", on page 963.
"FM"
Frequency modulation.
See: Chapter 15.1.3.4, "FM modulation", on page 965.
"PWM"
Pulse width modulation
See: Chapter 15.1.3.3, "PWM modulation", on page 964
"FSK"
Frequency shift keying (FSK) modulation.
See:Chapter 15.1.3.5, "FSK modulation", on page 967.
Remote command:
WGENerator<m>:MODulation:TYPE on page 2223
Carrier frequency
Sets the frequency of the carrier signal.
Remote command:
WGENerator<m>:MODulation:CARRier:FREQuency on page 2224
Setup of the waveform generator