Configuration Guide Global IP-MAC Binding Commands
The following example enables a binding policy.
Ruijie# configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Ruijie(config)# address-bind 3.3.3.3 00d0.f811.1112
Ruijie(config)# address-bind install
7.4 address-bind ipv6-mode
This command is used to set the IPv6 address binding mode. Use the no form of this command to
restore the default setting.
This command is also used to set the compatible mode.
address-bind ipv6-mode { compatible | loose | strict }
no address-bind ipv6-mode
The default is strict mode.
Global configuration mode.
The following example configures the IPv6 address binding mode.
Ruijie# configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Ruijie(config)# address-bind ipv6-mode compatible
Displays the exceptional port of the address binding.
To Next Page
Loading...
Need help?
General