Ruijie RG-S29 Series

Configuration Guide Port Security Commands
9.8 switchport port-security mac-address
Use this command to configure the static secure address.
Use the no form of this command to remove the configuration.
switchport port-security mac-address mac-address [ vlan vlan-id ]
no switchport port-security mac-address mac-address [ vlan vlan-id ]
Parameter
Description
Parameter
Description
mac-address
Static secure MAC address
vlan-id
VLAN ID of the MAC address
The configuration of vlan-id is only supported on the TRUNK
port.
Defaults
N/A
Command
Mode
Interface configuration mode
Usage Guide
N/A
Configuration
Examples
The following example sets the static secure address and VLAN ID of TRUNK port 10 to
00d0.f800.5555 and 2 respectively.
Ruijie# configure terminal
Ruijie(config)#interface gigabitethernet 0/10
Ruijie(config-if)# switchport port-security mac-address 00d0.f800.5555 vlan
2
Ruijie(config-if)# end
Related
Commands
Command
Description
show port-security
Displays port security settings.
switchport port-security
Enables the port-security.
switchport port-security binding
Configures the secure address binding.
switchport port-security mac-address interface
Sets the static secure address in privileged
EXEC mode.
switchport port-security aging
Sets the aging time for the secure address.
Platform
Description
N/A