Ruijie RG-S29 Series

Configuration Guide NFPP Commands
no arp-guard rate-limit { per-src-ip | per-src-mac | per-port }
default arp-guard rate-limit { per-src-ip | per-src-mac | per-port }
Parameter
Description
Parameter
Description
per-src-ip
Sets the rate limit for each source IP address.
per-src-mac
Sets the rate limit for each source MAC address.
per-port
Sets the rate limit for each port.
pps
Sets the rate limit, in the range of 1 to 19,999.
Defaults
The default value varies with products. For details, see the Configuration Guide.
Command
Mode
NFPP configuration mode
Usage Guide
N/A
Configuration
Examples
The following example sets the arp guard rate limit.
Ruijie(config)# nfpp
Ruijie(config-nfpp)# arp-guard rate-limit per-src-ip 2
Ruijie(config-nfpp)# arp-guard rate-limit per-src-mac 3
Ruijie(config-nfpp)# arp-guard rate-limit per-port 50
Related
Commands
Command
Description
nfpp arp-guard policy
Sets the rate limit and the attack threshold.
show nfpp arp-guard summary
Displays the configuration.
Platform
Description
N/A
21.8 arp-guard ratelimit-forwarding enable
Use this command to set the port based arp guard rate limit.
Use the no form of this command to disable this function.
Use the default form of this command to restore the default setting.
arp-guard ratelimit-forwarding enable
no arp-guard ratelimit-forwarding enable
default arp-guard ratelimit-forwarding enable
Parameter
Description
Parameter
Description
N/A
N/A