Ruijie RG-S29 Series - Page 1212

Configuration Guide NFPP Commands
N/A
N/A
Defaults
N/A
Command
Mode
Privileged EXEC mode
Usage Guide
N/A
Configuration
Examples
The following example clears the NFPP log buffer area.
Ruijie# clear nfpp log
Related
Commands
Command
Description
show nfpp log
Displays the NFPP log configuration or the log
buffer area.
Platform
Description
N/A
21.19 cpu-protect sub-interface { manage | protocol | route } percent
Use this command to configure the percent value of each type of packets occupied in the buffer area.
Use the no or default form of this command to restore the default setting.
cpu-protect sub-interface { manage | protocol | route } percent percent_value
no cpu-protect sub-interface { manage | protocol | route } percent
default cpu-protect sub-interface { manage | protocol | route } percent
Parameter
Description
Parameter
Description
percent_value
The percent value, in the range from 1 to 100.
Defaults
The default percent values of each type of packets occupied in the buffer area are:
Manage packets: 30;
Route packets: 25;
Protocol packets: 45.
Command
Mode
Global configuration mode
Usage Guide
N/A
Configuration
Examples
The following example sets the percent value of management packets in the buffer area to 60.
Ruijie(config)# cpu-protect sub-interface manage percent 60