Ruijie RG-S29 Series - Page 1278

Configuration Guide NFPP Commands
nfpp ip-guard enable
Enables the IP anti-attack function on the
interface.
nfpp ip-guard isolate-period
Sets the isolate time.
nfpp ip-guard policy
Sets the rate-limit threshold and attack
threshold.
Platform
Description
N/A
21.96 show nfpp ip-guard trusted-host
Use this command to display the trusted host free from being monitored.
show nfpp ip-guard trusted-host
Parameter
Description
Parameter
Description
N/A
N/A
Defaults
N/A
Command
Mode
Privileged EXEC mode
Usage Guide
N/A
Configuration
Examples
The following example displays the trusted host free from being monitored.
Ruijie# show nfpp ip-guard trusted-host
IP address mask
--------- ------
1.1.1.0 255.255.255.0
1.1.2.0 255.255.255.0
Total.2 record(s)
Related
Commands
Command
Description
ip-guard trusted-host
Sets the trusted host.
Platform
Description
N/A
21.97 show nfpp log
Use this command to display the NFPP log configuration.