Ruijie RG-S29 Series

Command Reference CWMP Commands
Ruijie(config-cwmp)#
Related
Commands
Command
Description
show cwmp configuration
Displays the current configuration of CWMP.
show cwmp status
Displays the running status of CWMP.
Platform
Description
N/A
9.3 acs username
Use this command to configure the ACS username to be authenticated for the CPE to connect to the
ACS. Use the no form of this command to restore the default setting.
acs username username
no acs username
Parameter
Description
Parameter
Description
username
Configures the ACS username to be authenticated for the CPE to
connect to the ACS.
Defaults
N/A
Command
Mode
CWMP configuration mode
Usage Guide
Configures the ACS username to be authenticated for the CPE to connect to the ACS.
Configuration
Examples
The following example configures the ACS username to be authenticated for the CPE to connect to
the ACS to admin.
Ruijie#config terminal
Enter configuration commands, one per line. End with CNTL/Z.
Ruijie(config)#cwmp
Ruijie(config-cwmp)#acs username admin
Ruijie(config-cwmp)#
Related
Commands
Command
Description
show cwmp configuration
Displays the current configuration of CWMP.
show cwmp status
Displays the running status of CWMP.
acs password
Configures the ACS password to be
authenticated for the CPE to connect to the