The following example shows the use of this command.
Ruijie# show erps
ERPS Information
Global Status : Enabled
Link monitored by : Not Oam
--------------------------------------------
R-APS VLAN : 4092
Ring Status : Enabled
West Port : Gi 0/5 (Blocking)
East Port : Gi 0/7 (Forwarding)
RPL Port : West Port
RPL Port Blocked VLAN : All
RPL Owner : Enabled
Holdoff Time : 0 milliseconds
Guard Time : 500 milliseconds
WTR Time : 5 minutes
Current Ring State : Idle
--------------------------------------------
R-APS VLAN : 4093
Ring Status : Enabled
West Port : Virtual Channel
East Port : Gi 0/10 (Forwarding)
RPL Port : None
RPL Port Blocked VLAN : All
RPL Owner : Disabled
Holdoff Time : 0 milliseconds
Guard Time : 500 milliseconds
WTR Time : 5 minutes
Current Ring State : Idle
--------------------------------------------
R-APS VLAN : 4094
Ring Status : Enabled
West Port : Virtual Channel
East Port : 12 (Forwarding)
RPL Port : None
RPL Port Blocked VLAN : All
RPL Owner : Disabled
Holdoff Time : 0 milliseconds
Guard Time : 500 milliseconds