Ruijie RG-S29 Series User Manual

Command Reference DHCP Commands
configure the DHCP manual binding.
ip dhcp pool
Defines the name of the DHCP address pool and enters the
DHCP address pool configuration mode.
Platform
Description
N/A
4.12 default-router
Use this command to define the default gateway of the DHCP client in the DHPC address pool
configuration mode. Use the no form of this command to restore the default setting.
default-router ip-address [ ip-address2…ip-address8 ]
no default-router
Parameter
Description
Parameter
Description
ip-address
Defines the IP address of the equipment. It is required to
configure one IP address at least.
ip-address2…ip-address8
(Optional) Up to 8 gateways can be configured.
Defaults
No gateway is defined by default.
Command
Mode
DHCP address pool configuration mode.
Usage Guide
In general, the DHCP client should get the information of the default gateway from the DHCP server.
The DHCP server should specify one gateway address for the client at least, and this address should
be of the same network segment as the address assigned to the client.
Configuration
Examples
The following example defines 192.168.12.1 as the default gateway.
default-router 192.168.12.1
Related
Commands
Command
Description
ip dhcp pool
Defines the name of the DHCP address pool and enters the DHCP
address pool configuration mode.
Platform
Description
N/A
4.13 dns-server
Use this command to define the DNS server of the DHCP client in the DHPC address pool
configuration mode. Use the no form of this command to restore the default setting.
dns-server { ip-address [ ip-address2…ip-address8 ] | use-dhcp-client interface-type

Ruijie RG-S29 Series Specifications

General

Brand	Ruijie
Model	RG-S29 Series
Category	Switch
Language	English